Skip to Main Content

CNC Fab Stage 2 High Pressure Oil Pump

This item requires Vehicle Fitment, please select Vehicle first!
OR if you know the Part Number you need, select from Options below.
Part Number: CNC-7.3-HPOP-SGT2-96-03
Availability: CALL FOR AVAILABILITY
Price: $694.95
CNC FABRICATION IS CURRENTLY HAVING MAJOR PROBLEMS GETTING CORE PUMPS BACK. IT IS RECOMMENDED THAT YOU CALL TO CHECK AVAILABILITY BEFORE ORDERING. IF WE DO NOT HAVE A PUMP IN STOCK, WE MAY REQUIRE THAT YOUR CORE PUMP BE SHIPPED TO US OR CNC FAB BEFORE WE CAN GET A PUMP SHIPPED OUT TO YOU.

CNC FABRICATION 7.3L STAGE 2 HIGH PRESSURE OIL PUMP FOR MODEL YEARS 1996-2003

Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors.
This pump will run great with stock injectors also! A difference in how the truck drives will definitely be seen! If you think your truck is dropping oil pressure in a hot tune with any injector size then this pump will be the one for you!

There is a $350 refundable core charge on this pump.

  • Comes with a new gasket
  • All of CNC Fabs pumps are fitted with steel thread inserts to ensure the threads will not rip out
  • Upgraded internals for more flow
  • New Viton o-rings to reuse your existing fittings
  • Every pump is flow bench tested to prevent DOA pumps

Customer Reviews

(5.00)stars out of 5
# of Ratings: 1
1. on 4/2/2021, said:
5 stars out of 5
This is my first and only HPOP replacement, I hope. Lol. I made the change due to a leak and I had 400,000 miles on the original. It was simple and most importantly Strictly Diesel provided expert advice when I had questions. Great customer service, bar none! Once installed, it cranked right up and I took her on a run down the road. Initial acceleration is much more responsive and acceleration at speed improved significantly (my seat of the pants test). I would buy again.
Was this comment helpful?
(2 people found this comment helpful, 0 did not)
Showing comments 1-1 of 1
Frequently Asked Questions

CNC Fab Stage 2 High Pressure Oil Pump fits the following vehicle(s):

  • 1996 Ford E250/350 Van 7.3L
  • 1997 Ford E250/350 Van 7.3L
  • 1998 Ford E250/350 Van 7.3L
  • 1999 Ford E250/350 Van 7.3L
  • 2000 Ford E250/350 Van 7.3L
  • 2001 Ford E250/350 Van 7.3L
  • 2002 Ford E250/350 Van 7.3L
  • 2003 Ford E250/350 Van 7.3L
  • 2000 Ford Excursion 7.3L
  • 2001 Ford Excursion 7.3L
  • 2002 Ford Excursion 7.3L
  • 2003 Ford Excursion 7.3L
  • 1996 Ford F250/350 OBS 7.3L
  • 1997 Ford F250/350 OBS 7.3L
  • 1999 Ford F250/350 Super Duty 7.3L
  • 1999.5 Ford F250/350 Super Duty 7.3L
  • 2000 Ford F250/350 Super Duty 7.3L
  • 2001 Ford F250/350 Super Duty 7.3L
  • 2002 Ford F250/350 Super Duty 7.3L
  • 2003 Ford F250/350 Super Duty 7.3L
  • 1999 Ford F450 Super Duty 7.3L
  • 1999.5 Ford F450 Super Duty 7.3L
  • 2000 Ford F450 Super Duty 7.3L
  • 2001 Ford F450 Super Duty 7.3L
  • 2002 Ford F450 Super Duty 7.3L
  • 2003 Ford F450 Super Duty 7.3L
  • 1999 Ford F550 Super Duty 7.3L
  • 1999.5 Ford F550 Super Duty 7.3L
  • 2000 Ford F550 Super Duty 7.3L
  • 2001 Ford F550 Super Duty 7.3L
  • 2002 Ford F550 Super Duty 7.3L
  • 2003 Ford F550 Super Duty 7.3L
Loading...